minerd.exe: command line parameters - Bitcoin Garden

Groestlcoin 6th Anniversary Release


Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.

Other Linux



Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here


ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.





ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.



Main Release (Main Net)
Testnet Release


ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.


Live Version (Not Recommended)





ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).






ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).




Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.


Remastered Improvements



ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.



Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 


ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.



Linux / OSX (Instructions)


UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.



Main Net
Main Net (FDroid)
Test Net


UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.




UPDATED – P2Pool Test Net



Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/


submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Bitcoin Rhodium Mining Guide

Bitcoin Rhodium Mining Guide
Happy Mining!

All available XRC pools can be found on MiningPoolStats

Bitcoin Rhodium Mining Hardware

Baikal Giant+: 1.6 GH/s
Baikal Quad Cube: 1.2 GH/s
Baikal Giant: 900 MH/s
Baikal Quadruple Mini Miner: 600 MH/s
Baikal Miner Cube: 300 MH/s
Baikal Mini Miner: 150 MH/s

Mining Setup

To mine Bitcoin Rhodium you need to set up an XRC wallet and configure your miner of choice. You can choose between Web wallet, Electrum-XRC or Magnum wallet. To set up a web wallet please visit wallet.bitcoinrh.org. Or download and install Electrum-XRC wallet (recommended) for Windows, Linux and MacOS.
Web wallet: wallet.bitcoinrh.org
Electrum-XRC wallet: electrum.bitcoinrh.org
Magnum wallet: https://magnumwallet.co

Sign up for XRC web wallet if not yet done so

  1. Create an account, with your username, password and secure question.
  2. Sign in and click “Create Wallet”.
  3. Set up a strong transaction password. Make sure you store it securely in a secure password manager of choice.
  4. Copy the seed somewhere safe. It’d be a good idea to write seed on a hardcopy and keep it safe.
  5. Paste it to confirm you got it right.
  6. Grab an address for the mining step. Your wallet is now ready to mine XRC.

Instructions for mining XRC on the official pool

Pool link: poolcore.bitcoinrh.org
  1. Any miner that supports X13 will be able to mine XRC. We have a few examples below of miners that are well tested with Bitcoin Rhodium network.
  2. For any miner, configure the miner to point to:
(0–0.8 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3061
(0.8–2 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3062
(3–4 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3063
(5+ GH/s) stratum+tcp://poolcore.bitcoinrh.org:3064
with your XRC address as username and x as password. You don’t need to open an account on pool. You will be mining to XRC address and mined coins will be transferred to your wallet
after blocks reach 10 block maturity
after you mined up minimal amount of coins (currently 0.1 XRC)
sometimes mined blocks could get rejected by network (orphaned) after they were counted as valid blocks. This is normal network behavior to follow longest chain
  1. http://poolcore.bitcoinrh.org is used to follow your miner and network statistics.

CPU Miner-Multi

Source: https://github.com/tpruvot/cpuminer-multi
Sample configuration with CPU Miner tested on UBUNTU.
“url” : “stratum+tcp://poolcore.bitcoinrh.org:3061”, “user” : “YOUR XRC ADDRESS”,
“pass” : “x”,
“algo” : “x13”, “threads” : 1,
“cpu-priority” : 5,
“cpu-affinity” : 1, “benchmark” : false, “debug” : true, “protocol”: true, “show-diff”: true, “quiet” : false
Command to run your CPUMiner: cpuminer -c cpuminer.json


SGMiner is a GPU-based mine: https://github.com/nicehash/sgminereleases
The configuration below was tested on Windows:
cd C:\Software\sgminer-5.6.1-nicehash-51-windowsamd64 sgminer.exe
— gpu-platform 1 — algorithm x13mod -url stratum+tcp://poolcore.bitcoinrh. org:3062 — pool-user — userpass :x — auto-fan — temp-target 70 — temp-over- heat 82 — temp-cutoff 85 — gpu-fan 65–85 — log-file log.txt — no-adl — no-extra- nonce -P –T


CCMiner is a GPU-based miner (NVIDIA)
Command to run your CCMINER:
ccminer-x64.exe -a x13 -o stratum+tcp://poolcore.bitcoinrh.org:3062 -O :without -D — show-diff

Baikal miner

Settings: Url:
(0–2 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3062
(3–4 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3063
(5+ GH/s) stratum+tcp://poolcore.bitcoinrh.org:3064
Algo: x13User: your XRC receiving address (make sure you set 2 distinct addresses for each hashing board)
Pass: x
Extranonce: leave off Priority set to 0 and 1
Once pool stratum address and your wallet as user are set up you should see your miner mining against XRC pool. When miner is working the status column is green. The pool and miner are incorrectly configured now as status says “Dead” highlighted in red.

Instructions for mining XRC on BSOD pool

Pool link: bsod.pw/en/pool/dashboard/XRC/
Use this code for your miner: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig
BSOD pool allows both solo and party mining.
For solo mining use code: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig -p m=solo And for party mining use: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig -p m=party.yourpassword
NOTICE: You can use us for North America and asia for Asia instead of euin your .bat file or config.
You can also use BSOD pool’s monitor app for Android and iOS.

Instructions for mining XRC on ZERGPOOL

Zergpool offers low fees (just 0.5%) and also SOLO and PARTY mining with no extra fees.
To mine XRC on Zergpool use this command lines for your miner:
Regular: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC Solo: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC,m=solo Party: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC,m=party
Use your coin wallet address as username in mining software. Specify c=SYMBOL as password to identify payout wallet coin, and the same coin in mc=SYMBOL to specify mining coin.
For more information and support please visit http://zergpool.com
Notice that when there are more pools mining XRC in different geographic/availability locations choose the nearest to you as lowest priority and then add desirable fall back pool options in different geographic locations or pools. This is useful when one pool experiences issues, to fall back to different pool in Bitcoin Rhodium network.

Calculate your Bitcoin Rhodium mining profitability

WhatToMine: https://whattomine.com/coins/317-xrc-x13
CoinCalculators: https://www.coincalculators.io/coin/bitcoin-rhodium

Feel free to ask questions in Discord community. There are lots of helpful people around the world watching XRC 24x7.

Bitcoin Rhodium Dev Team
submitted by BitcoinRh to BitcoinRhodium [link] [comments]

such beginner shibe thread wow how to get coin

 how to shibecoin v rich in minutes much instruct so simple any doge can do 


UPDATE 1/21/14: I'm not updating this guide anymore. Most of the steps should still work though. See the wiki or check the sidebar for updated instructions.
Before you do anything else, you need to get a wallet. Until there's a secure online wallet, this means you need to download the dogecoin client.
Now open the client you just downloaded. You'll be given a default address automatically, and it should connect to peers and start downloading the dogechain (aka blockchain in formal speak). You'll know because there will be a progress bar at the bottom and at the lower right there should be a signal strength icon (TODO: add screenshots).
If you've waited 2 or 3 minutes and nothing is happening, copy this:
maxconnections=100 addnode= addnode= addnode= addnode= addnode= addnode=doge.scryptpools.com addnode=doge.netcodepool.org addnode=doge.pool.webxass.de addnode=doge.cryptopool.it addnode=pool.testserverino.de addnode=doge.luckyminers.com addnode=doge.cryptovalley.com addnode=miner.coinedup.comdoge addnode=doge.cryptoculture.net addnode=dogepool.pw addnode=doge.gentoomen.org addnode=doge.cryptominer.net addnode= addnode= addnode= 
And paste it into a new text file called dogecoin.conf, which you then place into the dogecoin app directory.
Now restart your qt client and the blockchain should start downloading in about 1-2 minutes.
Once it finished downloading, you're ready to send and receive Dogecoins!


Decide how you want to get Dogecoin. Your options are:
I'll go into detail about each of these. I'm currently writing this out. I'll make edits as I add sections. Suggestions are welcome.


Mining is how new dogecoins are created. If you're new to crypto currencies, read this. To mine (also called "digging"), a computer with a decent GPU (graphics card) is recommended. You can also mine with your CPU, but it's not as efficient.


These instructions cover only Windows for now. To mine, you'll need to figure out what GPU you have. It'll be either AMD/ATI or Nvidia. The setup for both is approximately the same.

Step One: Choose a pool

There's a list of pools on the wiki. For now it doesn't really matter which one you choose. You can easily switch later.
NOTE: You can mine in two ways. Solo mining is where you mine by yourself. When you find a block you get all the reward. Pool mining is when you team up with other miners to work on the same block together. This makes it more likely that you'll find a block, but you won't get all of it, you'll have to split it up with others according to your share of the work. Pool mining is recommended because it gives you frequent payouts, because you find more blocks. The larger the pool you join, the more frequent the payouts, but the smaller the reward you get.
Over a long period of time the difference between pool and solo mining goes away, but if you solo mine it might be months before you get any coins.

Step two: Set up pool account

The pool you chose should have a getting started page. Read it and follow the instructions. Instructions vary but the general idea is:
When you're done with this, you'll need to know:

Step three: Download mining software

For best performance you'll need the right mining software.
Unzip the download anywhere you want.

Step four: Set up miner

Create a text file in the same folder as your miner application. Inside, put the command you'll be running (remove brackets).
For AMD it's cgminer.exe --scrypt -o stratum+tcp://: -u -p
For Nvidia it's cudaminer.exe -o stratum+tcp://: -O :
Substitute the right stuff in for the placeholders. Then on the next line of the text file type pause. This will let you see any errors that you get. Then save the file with any name you want, as long as the file extension is .bat. For example mine_serverName.bat.

Step five: Launch your miner

Just open the .bat file and a command line window should pop up, letting you know that the miner is starting. Once it starts, it should print out your hash rate.
If you now go to the pool website, the dashboard should start showing your hashrate. At first it'll be lower than what it says in the miner, but that's because the dashboard is taking a 5 minute average. It'll catch up soon enough.
NOTE: A normal hashrate is between 50 Kh/s up to even 1 Mh/s depending on your GPU.

You're now mining Dogecoins

That's it, nothing more to it.


CPU mining isn't really recommended, because you'll be spending a lot on more on power than you'd make from mining Dogecoin. You could better spend that money on buying Dogecoin by trading. But if you have free electricity and want to try it out, check out this informative forum post.


Trading has been difficult so far, but Dogecoin just got added to a few new exchanges. If you don't have a giant mining rig, this is probably the best way to get 100k or more dogecoins at the moment. I'll write up a more complete guide, but for now check out these sites:


Faucets are sites that give out free coins. Usually a site will give out somewhere between 1 and 100 Dogecoin. Every site has its own time limits, but usually you can only receive coins once every few hours, or in some cases, days. It's a great way to get started. All you do is copy your address from the receive section of your wallet and enter it on some faucet sites. Check out /dogecoinfaucets for more. If you go to each site on there you might end up with a couple hundred Dogecoin!


This method is pretty straightforward. Post your receiving address, and ask for some coins. Such poor shibe. The only catch is, don't do it here! Please go to /dogecoinbeg.


At the moment there are two tip bots:
Other redditors can give you Dogecoin by summoning the tip bot, something like this:
+dogetipbot 5 doge
This might happen if you make a good post, or someone just wants to give out some coins. Once you receive a tip you have to accept it in a few days or else it'll get returned. Do this by following the instructions on the message you receive in your inbox. You reply to the bot with "+accept". Commands go in the message body. Once you do that, the bot will create a tipping address for you, and you can use the links in the message you receive to see your info, withdraw coins to your dogecoin-qt wallet, see your history, and a bunch of other stuff.
As a bonus, so_doge_tip has a feature where you can get some Dogecoins to start with in exchange for how much karma you have. To do this, send the message "+redeem DOGE" to so_doge_tip. You'll need to create a tipping account if you don't have one.
If you want to create a tipping account without ever being tipped first, message either of the bots with "+register" and an address will be created for you.


  • 1/21/14 - Added note about this thread no longer being updated
  • 1/21/14 - Changed wallet links to official site
  • 12/27/13 - Added 1.3 wallet-qt links
  • 12/21/13 - Added new windows 1.2 wallet link
  • 12/20/13 - Fixed +redeem text
  • 12/18/13 - Added short blurb on trading.
  • 12/18/13 - Updated cudaminer to new version (cudaminer-2013-12-18.zip).
  • 12/18/13 - Fixed +redeem link
  • 12/18/13 - Updates dogecoin.conf, from here.
  • 12/17/13 - Linked to mining explanation.
  • 12/17/13 - Added link to CPU mining tutorial, in response to this.
  • 12/16/13 - Added links to tip commands, link to dogetipbot wiki.
  • 12/16/13 - Note about tip commands going in body, in response to this.
  • 12/16/13 - Added link to cgminer mirror, thanks to scubasteve812 and thanks to Bagrisham.
  • 12/16/13 - Note about removing brackets in response to this.
  • 12/15/13 - Fixed hash rate as per this comment, thanks lleti
  • 12/15/13 - Added info for all other ways of getting money, except for trading (placeholder for now)
  • 12/15/13 - Added windows GPU mining instructions 12/15/13 - Added wallet instructions, list of how to get money
submitted by lego-banana to dogecoin [link] [comments]

PSA: Users, (solo)miners, exchanges/merchants, and pool operators must be on v0.10.1 in advance of the hardfork otherwise you will get forked/booted off the network. Miners, please contact your pool operator to ask them if they have upgraded | Monero v0.10.1 released - mandatory upgrade!

Approximately the 9th of January there will be a hardfork on the Monero network. Most pools have upgraded or are in the process of upgrading, but some have not upgraded yet. If they don't upgrade before the hardfork they will get forked/booted off the network. As a result you will miss out on revenue if you are mining on these pools. Thus, if you are mining on one of the pools that hasn't upgraded yet or hasn't scheduled an upgrade, please contact your pool owner as soon as possible and urge them to upgrade. Alternatively, you can switch to a pool that is on the right version.
Pool Upgraded Contact
MoneroHash YES [email protected] & https://monerohash.com/#support
MoneroWorld YES [email protected] & https://moneroworld.com/#support
mineXMR YES [email protected] & http://minexmr.com/#support
PoolTo YES [email protected] & http://webchat.freenode.net/?channels=%23poolto.be
Moneropool YES [email protected] & https://moneropool.com/#support
Prohash YES [email protected] & http://xmr.prohash.net/#support
Crypto-pool YES [email protected] & http://monero.crypto-pool.f
Dwarfpool YES [email protected] & http://dwarfpool.com/contact/
Alimabi YES [email protected] & http://xmr.alimabi.cn/#support
CryptMonero YES [email protected] & http://cryptmonero.com/#support
Minergate YES https://forum.minergate.com/
SupportXMR YES [email protected] & http://supportxmr.com/#support
XMRpool YES [email protected] & http://xmrpool.eu/#support
Sheepman YES [email protected] & http://sheepman.mine.bz/#support
CoolPool YES [email protected] & http://xmr.coolpool.io/#support
US.to YES http://monero.us.to/#support
MakeXMR YES [email protected] & https://makexmr.com/#support
USXmrPool YES [email protected] & https://www.usxmrpool.com/#support
SuprNova YES https://xmr.suprnova.cc/index.php?page=contactform&action=
PoolDD YES [email protected] & http://pooldd.com/#support
XMRpool.net YES -
XMRpool Murmansoft YES [email protected] & [email protected] & http://xmrpool.murmansoft.ru/#support
XMR Miningspeed YES [email protected] & http://xmr.miningspeed.com/#support

An important message for pool operators and miners

From MoneroMooo:
To all pool operators:
If you haven't already, you will need to update the node-cryptonote-util software in order for your pool to cross the january fork. I think many of the pool ops have done so already, but for those who are not in #monero-pools, you will need this patch: https://paste.fedoraproject.org/506116/17116821/
This applies to zone117x's version of the pool. There is a version of this ported to clintar's fork, which is here: https://github.com/M5M400/node-cryptonote-util/commit/37f50f9b535f0258c3a1c6f7247a891b4c211ff3.
If you're not running this when the fork happens, you will be forked off.
For pool miners, you may want to check with your pool op that they're running the patch a few days before the fork, and switch to a known good pool otherwise. Please prefer smaller pools when doing so.
Also bear in mind that running v0.10.1 or the GUI beta is mandatory. Any other versions will get booted off the network. Thus, miners, please email your pools and ask them if they are running v0.10.1 and have applied aforementioned patch.

General hardfork information

The upcoming fork will enable Ring Confidential Transactions. This will significantly enhance Monero's privacy. Note that they will not be enforced yet. That is, this hardfork will enable them, whereas the hardfork of September 2017 will enforce them. If you want to read more about Ring Confidential Transactions, see:
Due to variance the hard fork will likely be on the 9th or 10th of January. A specific block height was determined for the hardfork, not a specific date. The specific blockheight for the hardfork can be found here. That is:
// version 4 starts from block 1220516
As an user you need to run either v0.10.1 or the Monero Core GUI Beta 1.

Monero v0.10.1 - Wolfram Warptangent - release

First and foremost, please upgrade to this version. A blockchain resync is not needed. Only this version will work after the fork of January 5. Note that this fork will enable Ring CT transactions, but will not enforce them yet.


This is a necessary point release of Monero v0.10 "Wolfram Warptangent", and is highly recommended as it includes consensus-changing fixes to the RingCT implementation and various other bug fixes.
Some highlights of this release are:

Official Download Links:

All available binaries can be found on the getmonero download page or on Github (at the bottom).
Official Direct Links:

Download Hashes

If you would like to verify that you have downloaded the correct file, please use the following SHA256 hashes:

Updating: Wallet Files

Simply create a new directory with the 0.10.1 binaries and copy your wallet files over to there. Make sure to backup your wallet files properly. If you need any help, feel free to PM me or respond in this thread. Note that your wallet contains three files, namely wallet.keys (this is the most important file, since it contains your keys), wallet (this is the wallet cache, which contains your transaction history and private tx keys), and wallet.address (which is just your public address). In addition, if you incur a bug whilst upgrading, you can always restore your wallet with the mnemonic seed as follows:
For Mac and Linux:
./monero-wallet-cli --restore-deterministic-wallet
On Windows make sure to launch it from the command line. Go to the folder monero-cli-wallet is located and make sure your cursor isn't located on any of the files. Subsequently do SHIFT + right click and it will give you an option to "Open command window here". Lastly, type the following command:
monero-wallet-cli.exe --restore-deterministic-wallet
If you want to restore from the private keys instead of the mnemonic seed, replace --restore-deterministic-wallet with --generate-from-keys

Contributors for this Release

This release was the direct result of 29 people who worked, largely unpaid and altruistically, to put out 481 commits containing 10 517 new lines of code. We'd like to thank them very much for their time and effort. In no particular order they are:


You can find the release (and binaries) of the first beta here.
submitted by dEBRUYNE_1 to Monero [link] [comments]

Creating a Headless Staking Node on Ubuntu 18.04

Creating a Headless Staking Node on Ubuntu 18.04
##UPDATE## Step 8 - Option 2, has some bugs in the final build process. i haven't had time to work them out yet!

This guide will take you through building and running a headless x42 Full Node! The OS I am using here is Ubuntu 18.04, this guide picks up from a complete/fresh ubuntu install.
This is meant to setup a staking node and so this guide will run you through building, configuring and setting up staking. It will not cover sending transactions or anything else.
The things we are going to do:
  • Step 1 - Install .net core
  • Step 2 - Download The x42 Node Source & Compile It
  • Step 3 - Setting The x42 Node Up To Run On Boot
  • Step 4 - Setup A New Wallet
  • Step 5 - Configure The x42 Daemon
  • Step 6 - Get Address
  • Step 7 - Check Balance
  • Step 8 - Connect The UI Wallet To A Headless Node
  • Step 8 - [Option 1 - Use Installer] Connect The UI Wallet To A Headless Node
  • Step 8 - [Option 2 - Build/Compile UI Only] Connect The UI Wallet To A Headless Node # BROKEN#

Step 1 - Install .net Core

Here is the reference link:
Register Microsoft Key’s & Install Their repos:
cd /tmp wget -q https://packages.microsoft.com/config/ubuntu/18.04/packages-microsoft-prod.deb sudo dpkg -i packages-microsoft-prod.deb sudo add-apt-repository universe sudo apt -y install apt-transport-https sudo apt update sudo apt -y install dotnet-sdk-2.2 
Microsoft collect telemetry data by default, if you are part of the “tin foil hat brigade” you can set the following environment variable to turn it off:
echo "DOTNET_CLI_TELEMETRY_OPTOUT=1" >> /etc/environment 
now you should be at a point where .net core is installed on your system… that wasn’t so hard was it! You can check by running the following command:
The output should look like this:
$ dotnet --list-sdks 2.2.103 [/usshare/dotnet/sdk] 

Step 2 - Download & Compile The x42 Node

This part assumes you have GIT installed, if not:
apt -y install git 
Now to pull down the source and compile it!
cd ~/ git clone https://github.com/x42protocol/X42-FullNode.git # “cd” into the source folder cd X42-FullNode/src/ 
Now .net core uses NuGet for package management, before we compile, we need to pull down all of the required packages.. its as simple as running (this will take a couple of minutes) inside of “X42-FullNode/src/”:
dotnet restore 
now we are ready to compile the source, execute (inside of “X42-FullNode/src/”):
dotnet build --configuration Release 
ignore the yellow warnings, this is just the rosyln compiler having a grumble.. if you get red ones then something went wrong! The “--configuration Release” will strip out all debug symbols and slim things down.. only a little, this optional parameter is not mandatory.
Once this is done everything is built/compiled, you can run the daemon directly from the repository, this can be done by going to:
cd ~/X42-FullNode/src/x42.x42D/bin/Release/netcoreapp2.1 dotnet x42.x42D.dll 
this will kick off the node, however if you exit SSH at this time it will kill the process! however I always recommend copying out the binaries to a separate folder. This can be done with the following:
mkdir ~/x42node mv ~/X42-FullNode/src/x42.x42D/bin/Release/netcoreapp2.1/*.* ~/x42node/ 
now we have everything we need to run the node outside the git repository! What we need to do now is run the node and have it create the default x42.conf file.. so
cd ~/x42node dotnet x42.x42D.dll 
feel free to hit “CTRL + C” to exit the application after a couple of seconds, by then the folders/files would have been created at the following path:

Step 3 - Setting The x42 Node Up To Run on Boot

Now we are going to create a service file so our x42 node automatically starts when the system is rebooted.
THINGS TO NOTE ABOUT BELOW.. CHANGE THE ##USER## to the username your currently using as these files are within your home directory!
We need to drop to root for this..
sudo -i cat < /etc/systemd/system/x42node.service [Unit] Description=x42 Node [Service] WorkingDirectory=/home/##USER##/x42node ExecStart=/usbin/dotnet /home/##USER##/x42node/x42.x42D.dll Restart=always # Restart service after 10 seconds if the dotnet service crashes: RestartSec=10 SyslogIdentifier=x42node User=##USER## Environment=ASPNETCORE_ENVIRONMENT=Development [Install] WantedBy=multi-user.target EOF 
To enable the service, run the following (as the root user):
systemctl enable x42node.service 
BOOM.. the node isn’t running yet.. but next time the system restarts it will automatically run!
now lets exit out of root!
We can now start the node up and begin downloading blocks, by running the following command:
sudo systemctl start x42node.service 
if you want to check its loaded and see some of the output, you can run:
sudo systemctl status x42node.service 
an example of the output:
$ sudo systemctl status x42node.service ● x42node.service - x42 Node Loaded: loaded (/etc/systemd/system/x42node.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2019-01-24 15:47:55 UTC; 14s ago Main PID: 5456 (dotnet) Tasks: 23 (limit: 1112) CGroup: /system.slice/x42node.service └─5456 /usbin/dotnet /home/darthnoodle/x42node/x42.x42D.dll Jan 24 15:48:09 x42staking x42node[5456]: Batch Size: 0 Mb (0 headers) Jan 24 15:48:09 x42staking x42node[5456]: Cache Size: 0/50 MB Jan 24 15:48:09 x42staking x42node[5456]: Jan 24 15:48:09 x42staking x42node[5456]: =======Mempool======= Jan 24 15:48:09 x42staking x42node[5456]: MempoolSize: 0 DynamicSize: 0 kb OrphanSize: 0 Jan 24 15:48:09 x42staking x42node[5456]: Jan 24 15:48:09 x42staking x42node[5456]: info: Stratis.Bitcoin.Connection.ConnectionManagerBehavior[0] Jan 24 15:48:09 x42staking x42node[5456]: Peer '[::ffff:]:52342' connected (outbound), agent 'x42:1.2.13 (70012)', height 213920 Jan 24 15:48:09 x42staking x42node[5456]: info: Stratis.Bitcoin.Connection.ConnectionManagerBehavior[0] Jan 24 15:48:09 x42staking x42node[5456]: Peer '[::ffff:]:52342' offline, reason: 'Receiving cancelled.'. All node screen output can be found in the /valog/syslog file. 

Step 4 - Setup a New Wallet

With the Node running, we now need to setup and/or restore a wallet!
Everything will be performed through the API’s, however by default these API’s are listening on localhost (, if you are connecting in remotely then this would be a problem since you cant hit that IP. The solution, SSH TUNNEL!
Execute the following command on your local system:
ssh -L 42220:localhost:42220 @ 
This binds the local port (on your system) with on the remote system, once you have executed the command you can type the following address in your laptop/desktop’s web browser and be able to access the API’s: 
It should look something like this:
To Create a new wallet, first we have to generate some mnemonic works (e.g. the seed), you can do that by going to the following API:
Hit the “Try it out” button which then prompts you for 2 fields:
Enter “English” and I would recommend 24 words as this greatly increases the seed strength! Once that is done you hit execute and then scroll down to see the “Response Body”, this should contain the mnemonic which you are going to use to create the wallet! This looks something like below:
So now we have our mnemonic, its time to generate the wallet, for this we need to use the API:
There are a number of parameters which are required in order to create a wallet:
WalletCreationRequest{ mnemonic string password* string passphrase* string name* string } 
It should be noted that the password and mnemonic are is the most important parts of this request where the “password” will encrypt the wallet and Is required to unlock it.
  • Hit the “Try it out” button
  • input the necessary data
  • Insert the mnemonic
  • Put a password & passphrase
  • “Name” is what your wallet will be called
It should look something like the following:
Hit “Execute”, the “Loading” sign may spin for a few minutes while the wallet is created… once the wallet has been created the “Response Body” will return the mnemonic you have just used.. we now have a wallet!!
This is where we will now jump back out and to configure the node to automatically load the wallet and automatically start staking when it first loads.

Step 5 - Configure The x42 Daemon

Now we are going to modify the x42.conf file in order to automatically load our wallet and start staking 😊
First things first, lets stop our node by running the following command:
sudo systemctl stop x42node.service 
CD to the following folder and view its contents:
~/.x42node/x42/x42Main ls -lah 
within that folder there should be 2 files you are interested in:
-rw-r--r-- 1 darthnoodle darthnoodle 18K Jan 28 16:01 TestWallet.wallet.json -rw-rw-r-- 1 darthnoodle darthnoodle 3.1K Jan 24 15:25 x42.conf 
So TestWallet.wallet.json is our physical wallet that will be loaded, but for right now we want to modify the x42.conf file.. fire up your favourite text editor (if you use VI you’re a masochist)..
nano x42.conf 
The area we are interested in is the following:
####Miner Settings#### #Enable POW mining. #mine=0 #Enable POS. #stake=0 #The address to use for mining (empty string to select an address from the wallet). #mineaddress= #The wallet name to use when staking. #walletname= #Password to unlock the wallet. #walletpassword= #Maximum block size (in bytes) for the miner to generate. #blockmaxsize=1000000 #Maximum block weight (in weight units) for the miner to generate. #blockmaxweight=1000000 #Enable splitting coins when staking. #enablecoinstakesplitting=1 #Minimum size of the coins considered for staking, in satoshis. #minimumstakingcoinvalue=10000000 #Targeted minimum value of staking coins after splitting, in satoshis. #minimumsplitcoinvalue=10000000000 
Uncomment (remove the #) of the following lines and change their value:
stake=1 (changed to 1) walletname=TestWallet (changed to our Wallet Name) walletpassword=password123 (changed to the wallet password) 
save the file and exit back to the command prompt, now we shall restart the node with the following command:
sudo systemctl status x42node.service 
now the wallet is automatically loaded and ready for action!
You can check its loaded by going back to the API and executing the following command:
Or execute the following command on the NODE:
curl -X GET "" -H "accept: application/json" 
both will produce the same output, if you scroll to the bottom you should see something like this:
======Wallets====== TestWallet/account 0, Confirmed balance: 0.00000000 Unconfirmed balance: 0.00000000 
This means the wallet is loaded and ready for action!!

Step 6 - Get Addresses

Next thing you are probably going to want is a receive address and to check the balance and TX history.. so lets start with getting an address!
Go to the following API:
Fill in the Wallet name which is “TestWallet” (in this example) and “account 0” (which is the first/default account):
Hit execute and you should have an x42 address within the “Response Body”:

BOOM… ok now we can receive funds! 😊

Step 7 - Check TX History

Go to the API and the following call:
The 2 fields we are most concerned about are:
Input the name of the wallet and account you want to view the history of, then hit execute. The other fields can be black. This will return a list of TX’s that the wallet has received:
This should look like the following:
There is an easier way of doing this, that doesn’t require you to be connected to your node.. especially if your only interested in viewing your staking rewards… THE EXPLORER!
Access the following URL:
this will allow you to easily see all TX’s associated with this address, it should look something like below:
… and your done! By this point your node should be running, staking and you have an easy way to view transactions/rewards 😊

Step 8 - Connect The UI Wallet To A Headless Node

The UI utilises a combination of technologies, however the important part is the code attempts to access the x42 Node API on
So you have 2 options here:
  1. Download the Wallet Installers
  2. Compile The UI Yourselves
Pick the option that best suits you given the pros/cons below:
Option 1 - Pro's/Cons
  • If you use the installer, its quick and easy.
  • This also installs an x42 node on your system which runs when the UI loads.
  • If you dont setup an SSH tunnel before running the wallet the local node will bind to the port and the tunnel wont work.. you will be connecting to the local wallet!!
Option 2 - Pro's/Cons
  • You only run the UI, the x42 node is not installed
  • you dont have a superfluous node running, downloading blocks on your local system
  • Time Consuming
  • Have to download dependencies and manually compile the code

Pre-Requirement - Needed For Both Options!!
As previously mentioned, the UI attempts to access the API's on, however our node isnt running on our local system. IN ORDER TO GET IT WORKING YOU NEED TO HAVE AN SSH TUNNEL, THIS TUNNEL NEEDS TO REMAIN ACTIVE WHENEVER YOU WANT TO ACCESS THE WALLET.
this can be done by executing the following command:
ssh -L 42220:localhost:42220 @ 

Step 8 - [Option 1 - Use Installer] Connect The UI Wallet To A Headless Node

Download and install the UI/Wallet & Node from:

Those of us who dont want to run a local node and just want the UI, execute the following commands (as an administrator):
cd C:\Program Files\x42 Core\resources\daemon\ ren x42.x42D.exe x42.x42D.exe.bak 
The above is with Windows, if your are in *NIX then locate the daemon and rename it (i will update how to do that/where to find it shortly)
Setup the SSH tunnel as outlined above, Execute the wallet and it will load, however you will see an exception:

dont worry, this is just the wallet trying to execute/start the x42 node which we dont want, if all works according to plan.. after you click "OK" you should now be presented with the wallet UI and have the option to select what wallet you would like to load:

... DONE!

Step 8 - [Option 2 - Build/Compile UI Only] Connect The UI Wallet To A Headless Node ###BROKEN


Ok, this is the fun bit! .. we need to install the following dependencies. these instructions are written for a Windows system but it should be easy enough to perform the same on a *NIX system.
Install Dependencies
In order to build the wallet UI, you need to install the following components:
  • git
  • NodeJS
  • Electron Builder
First thing you need to do is install git, so download and install the package:
Next you need to install NodeJS, download and install the package:
Next we need to install the node package manager:
npm install npx –verbose 
next we need to make sure we have Visual Studio build tools and Python (2.7) installed, this can be done by executing the following (AS AN ADMINISTRATOR!):
npm install -g --production windows-build-tools 
this will install the necessary tools to build C#/C++ code and python 2.7, this could take some time! When its done you should have something like the following;


Build & Install - Windows
Create a temp folder to navigate to a folder where you want to download the GIT repository, execute the following command:
git clone https://github.com/x42protocol/X42-FullNode-UI.git 
This will clone the repository into the folder, it will only clone the wallet and not the Node source! now lets CD into the folder and build the UI:
cd X42-FullNode-UI\FullNode.UI npm install 
This will download and install all dependencies (can take a while), at the end you should see something like..

Now the stock UI has a number of third-party libraries which contain some vulnerabilities, being a security conscious person, ive also run:
npm audit fix 
when this is done, we have fixed most of the package vulnerabilities 😊 We also get a complaint about the typescript library being too new for the version of angular in use, so run the following command to install the additional dependency:
npm install [email protected]">=2.4.2 <2.7.0" 
now its time to build the UI, execute the following:
npm run build:prod 
once complete you should see something like the following..

Next its time to compile the electron binary, it should be noted that the build/package process utilises AppVoyer which is not installed and if you attempt to build right now you will get the following error:
cannot expand pattern "${productName}-v${version}-setup-${os}-${env.arch}.${ext}": env arch is not defined. 
To fix this we need to modify the build file, this is a quick one liner that can do it:
powershell -Command "(gc electron-builder.json) -replace 'env.arch', 'arch' | Out-File electron-builder.json" 
Essentially the offending line for Windows is..
"artifactName": "${productName}-v${version}-setup-${os}-${env.arch}.${ext}" 
The build cannot resolve “env.arch”, so the above one liner replaces “env.arch” with “arch” which works 😊
execute the following command:
npx electron-builder build --windows --x64 
At present i get the following error, no matter what i do.. and ive ran out of time to go hunting about.. if anyone has any ideas on how to fix then please post in here or message me on discord:


Happy staking!

If you found this post helpful, then buy me a beer and send a donation to XQXeqrNFad2Uu7k3E9Dx5t4524fBsnEeSw
submitted by D4rthNoodle to x42 [link] [comments]

The Nexus FAQ - part 1

Full formatted version: https://docs.google.com/document/d/16KKjVjQH0ypLe00aoTJ_hZyce7RAtjC5XHom104yn6M/

Nexus 101:

  1. What is Nexus?
  2. What benefits does Nexus bring to the blockchain space?
  3. How does Nexus secure the network and reach consensus?
  4. What is quantum resistance and how does Nexus implement this?
  5. What is Nexus’ Unified Time protocol?
  6. Why does Nexus need its own satellite network?

The Nexus Currency:

  1. How can I get Nexus?
  2. How much does a transaction cost?
  3. How fast does Nexus transfer?
  4. Did Nexus hold an ICO? How is Nexus funded?
  5. Is there a cap on the number of Nexus in existence?
  6. What is the difference between the Oracle wallet and the LLD wallet?
  7. How do I change from Oracle to the LLD wallet?
  8. How do I install the Nexus Wallet?

Types of Mining or Minting:

  1. Can I mine Nexus?
  2. How do I mine Nexus?
  3. How do I stake Nexus?
  4. I am staking with my Nexus balance. What are trust weight, block weight and stake weight?

Nexus 101:

1. What is Nexus (NXS)?
Nexus is a digital currency, distributed framework, and peer-to-peer network. Nexus further improves upon the blockchain protocol by focusing on the following core technological principles:
Nexus will combine our in-development quantum-resistant 3D blockchain software with cutting edge communication satellites to deliver a free, distributed, financial and data solution. Through our planned satellite and ground-based mesh networks, Nexus will provide uncensored internet access whilst bringing the benefits of distributed database systems to the world.
For a short video introduction to Nexus Earth, please visit this link
2. What benefits does Nexus bring to the blockchain space?
As Nexus has been developed, an incredible amount of time has been put into identifying and solving several key limitations:
Nexus is also developing a framework called the Lower Level Library. This LLL will incorporate the following improvements:
For information about more additions to the Lower Level Library, please visit here
3. How does Nexus secure the network and reach consensus?
Nexus is unique amongst blockchain technology in that Nexus uses 3 channels to secure the network against attack. Whereas Bitcoin uses only Proof-of-Work to secure the network, Nexus combines a prime number channel, a hashing channel and a Proof-of-Stake channel. Where Bitcoin has a difficulty adjustment interval measured in weeks, Nexus can respond to increased hashrate in the space of 1 block and each channel scales independently of the other two channels. This stabilizes the block times at ~50 seconds and ensures no single channel can monopolize block production. This means that a 51% attack is much more difficult to launch because an attacker would need to control all 3 channels.
Every 60 minutes, the Nexus protocol automatically creates a checkpoint. This prevents blocks from being created or modified dated prior to this checkpoint, thus protecting the chain from malicious attempts to introduce an alternate blockchain.
4. What is quantum resistance and how does Nexus implement it?
To understand what quantum resistance is and why it is important, you need to understand how quantum computing works and why it’s a threat to blockchain technology. Classical computing uses an array of transistors. These transistors form the heart of your computer (the CPU). Each transistor is capable of being either on or off, and these states are used to represent the numerical values 1 and 0.
Binary digits’ (bits) number of states depends on the number of transistors available, according to the formula 2n, where n is the number of transistors. Classical computers can only be in one of these states at any one time, so the speed of your computer is limited to how fast it can change states.
Quantum computers utilize quantum bits, “qubits,” which are represented by the quantum state of electrons or photons. These particles are placed into a state called superposition, which allows the qubit to assume a value of 1 or 0 simultaneously.
Superposition permits a quantum computer to process a higher number of data possibilities than a classical computer. Qubits can also become entangled. Entanglement makes a qubit dependant on the state of another, enabling quantum computing to calculate complex problems, extremely quickly.
One such problem is the Discrete Logarithm Problem which elliptic curve cryptography relies on for security. Quantum computers can use Shor’s algorithm to reverse a key in polynomial time (which is really really really fast). This means that public keys become vulnerable to quantum attack, since quantum computers are capable of being billions of times faster at certain calculations. One way to increase quantum resistance is to require more qubits (and more time) by using larger private keys:
Bitcoin Private Key (256 bit) 5Kb8kLf9zgWQnogidDA76MzPL6TsZZY36hWXMssSzNydYXYB9KF
Nexus Private Key (571 bit) 6Wuiv513R18o5cRpwNSCfT7xs9tniHHN5Lb3AMs58vkVxsQdL4atHTF Vt5TNT9himnCMmnbjbCPxgxhSTDE5iAzCZ3LhJFm7L9rCFroYoqz
Bitcoin addresses are created by hashing the public key, so it is not possible to decrypt the public key from the address; however, once you send funds from that address, the public key is published on the blockchain rendering that address vulnerable to attack. This means that your money has higher chances of being stolen.
Nexus eliminates these vulnerabilities through an innovation called signature chains. Signature chains will enable access to an account using a username, password and PIN. When you create a transaction on the network, you claim ownership of your signature chain by revealing the public key of the NextHash (the hash of your public key) and producing a signature from the one time use private key. Your wallet then creates a new private/public keypair, generates a new NextHash, including the corresponding contract. This contract can be a receive address, a debit, a vote, or any other type of rule that is written in the contract code.
This keeps the public key obscured until the next transaction, and by divorcing the address from the public key, it is unnecessary to change addresses in order to change public keys. Changing your password or PIN code becomes a case of proving ownership of your signature chain and broadcasting a new transaction with a new NextHash for your new password and/or PIN. This provides the ability to login to your account via the signature chain, which becomes your personal chain within the 3D chain, enabling the network to prove and disprove trust, and improving ease of use without sacrificing security.
The next challenge with quantum computers is that Grover’s algorithm reduces the security of one-way hash function by a factor of two. Because of this, Nexus incorporates two new hash functions, Skein and Keccak, which were designed in 2008 as part of a contest to create a new SHA3 standard. Keccak narrowly defeated Skein to win the contest, so to maximize their potential Nexus combines these algorithms. Skein and Keccak utilize permutation to rotate and mix the information in the hash.
To maintain a respective 256/512 bit quantum resistance, Nexus uses up to 1024 bits in its proof-of-work, and 512 bits for transactions.
5. What is the Unified Time protocol?
All blockchains use time-stamping mechanisms, so it is important that all nodes operate using the same clock. Bitcoin allows for up to 2 hours’ discrepancy between nodes, which provides a window of opportunity for the blockchain to be manipulated by time-related attack vectors. Nexus eliminates this vulnerability by implementing a time synchronization protocol termed Unified Time. Unified Time also enhances transaction processing and will form an integral part of the 3D chain scaling solution.
The Unified Time protocol facilitates a peer-to-peer timing system that keeps all clocks on the network synchronized to within a second. This is seeded by selected nodes with timestamps derived from the UNIX standard; that is, the number of seconds since January 1st, 1970 00:00 UTC. Every minute, the seed nodes report their current time, and a moving average is used to calculate the base time. Any node which sends back a timestamp outside a given tolerance is rejected.
It is important to note that the Nexus network is fully synchronized even if an individual wallet displays something different from the local time.
6. Why does Nexus need its own satellite network?
One of the key limitations of a purely electronic monetary system is that it requires a connection to the rest of the network to verify transactions. Existing network infrastructure only services a fraction of the world’s population.
Nexus, in conjunction with Vector Space Systems, is designing communication satellites, or cubesats, to be launched into Low Earth Orbit in 2019. Primarily, the cubesat mesh network will exist to give Nexus worldwide coverage, but Nexus will also utilize its orbital and ground mesh networks to provide free and uncensored internet access to the world.

The Nexus Currency (NXS):

1. How can I get Nexus?
There are two ways you can obtain Nexus. You can either buy Nexus from an exchange, or you can run a miner and be rewarded for finding a block. If you wish to mine Nexus, please follow our guide found below.
Currently, Nexus is available on the following exchanges:
Nexus is actively reaching out to other exchanges to continue to be listed on cutting edge new financial technologies..
2. How much does a transaction cost?
Under Nexus, the fee structure for making a transaction depends on the size of your transaction. A default fee of 0.01 NXS will cover most transactions, and users have the option to pay higher fees to ensure their transactions are processed quickly.
When the 3D chain is complete and the initial 10-year distribution period finishes, Nexus will absorb these fees through inflation, enabling free transactions.
3. How fast does Nexus transfer?
Nexus reaches consensus approximately every ~ 50 seconds. This is an average time, and will in some circumstances be faster or slower. NXS currency which you receive is available for use after just 6 confirmations. A confirmation is proof from a node that the transaction has been included in a block. The number of confirmations in this transaction is the number that states how many blocks it has been since the transaction is included. The more confirmations a transaction has, the more secure its placement in the blockchain is.
4. Did Nexus hold an ICO? How is Nexus funded?
The Nexus Embassy, a 501(C)(3) not-for-profit corporation, develops and maintains the Nexus blockchain software. When Nexus began under the name Coinshield, the early blocks were mined using the Developer and Exchange (Ambassador) addresses, which provides funding for the Nexus Embassy.
The Developer Fund fuels ongoing development and is sourced by a 1.5% commission per block mined, which will slowly increase to 2.5% after 10 years. This brings all the benefits of development funding without the associated risks.
The Ambassador (renamed from Exchange) keys are funded by a 20% commission per block reward. These keys are mainly used to pay for marketing, and producing and launching the Nexus satellites.
When Nexus introduces developer and ambassador contracts, they will be approved, denied, or removed by six voting groups namely: currency, developer, ambassador, prime, hash, and trust.
Please Note: The Nexus Embassy reserves the sole right to trade, sell and or use these funds as required; however, Nexus will endeavor to minimize the impact that the use of these funds has upon the NXS market value.
5. Is there a cap on the number of NXS in existence?
After an initial 10-year distribution period ending on September 23rd, 2024, there will be a total of 78 million NXS. Over this period, the reward gradient for mining Nexus follows a decaying logarithmic curve instead of the reward halving inherent in Bitcoin. This avoids creating a situation where older mining equipment is suddenly unprofitable, encouraging miners to continue upgrading their equipment over time and at the same time reducing major market shocks on block halving events.
When the distribution period ends, the currency supply will inflate annually by a maximum of 3% via staking and by 1% via the prime and hashing channels. This inflation is completely unlike traditional inflation, which degrades the value of existing coins. Instead, the cost of providing security to the blockchain is paid by inflation, eliminating transaction fees.
Colin Cantrell - Nexus Inflation Explained
6. What is the difference between the LLD wallet and the Oracle wallet?
Due to the scales of efficiency needed by blockchain, Nexus has developed a custom-built database called the Lower Level Database. Since the development of the LLD wallet, which is a precursor to the Tritium updates, you should begin using the LLD wallet to take advantage of the faster load times and improved efficiency.
The Oracle wallet is a legacy wallet which is no longer maintained or updated. It utilized the Berkeley DB, which is not designed to meet the needs of a blockchain. Eventually, users will need to migrate to the LLD wallet. Fortunately, the wallet.dat is interchangeable between wallets, so there is no risk of losing access to your NXS.
7. How do I change from Oracle to the LLD wallet?
Step 1 - Backup your wallet.dat file. You can do this from within the Oracle wallet Menu, Backup Wallet.
Step 2 - Uninstall the Oracle wallet. Close the wallet and navigate to the wallet data directory. On Windows, this is the Nexus folder located at %APPDATA%\Nexus. On macOS, this is the Nexus folder located at ~/Library/Application Support/Nexus. Move all of the contents to a temporary folder as a backup.
Step 3 - Copy your backup of wallet.dat into the Nexus folder located as per Step 2.
Step 4 - Install the Nexus LLD wallet. Please follow the steps as outlined in the next section. Once your wallet is fully synced, your new wallet will have access to all your addresses.
8. How do I install the Nexus Wallet?
You can install your Nexus wallet by following these steps:
Step 1 - Download your wallet from www.nexusearth.com. Click the Downloads menu at the top and select the appropriate wallet for your operating system.
Step 2 - Unzip the wallet program to a folder. Before running the wallet program, please consider space limitations and load times. On the Windows OS, the wallet saves all data to the %APPDATA%\Nexus folder, including the blockchain, which is currently ~3GB.
On macOS, data is saved to the ~/Library/Application Support/Nexus folder. You can create a symbolic link, which will allow you to install this information in another location.
Using Windows, follow these steps:
On macOS, follow these steps:
Step 3 (optional) - Before running the wallet, we recommend downloading the blockchain database manually. Nexus Earth maintains a copy of the blockchain data which can save hours from the wallet synchronization process. Please go to www.nexusearth.com and click the Downloads menu.
Step 4 (optional) - Extract the database file. This is commonly found in the .zip or .rar format, so you may need a program like 7zip to extract the contents. Please extract it to the relevant directory, as outlined in step 2.
Step 5 - You can now start your wallet. After it loads, it should be able to complete synchronization in a short time. This may still take a couple of hours. Once it has completed synchronizing, a green check mark icon will appear in the lower right corner of the wallet.
Step 6 - Encrypt your wallet. This can be done within the wallet, under the Settings menu. Encrypting your wallet will lock it, requiring a password in order to send transactions.
Step 7 - Backup your wallet.dat file. This can be done from the File menu inside the wallet. This file contains the keys to the addresses in your wallet. You may wish to keep a secure copy of your password somewhere, too, in case you forget it or someone else (your spouse, for example) ever needs it.
You should back up your wallet.dat file again any time you create – or a Genesis transaction creates (see “staking” below) – a new address.

Types of Mining or Minting:

1.Can I mine Nexus?
Yes, there are 2 channels that you can use to mine Nexus, and 1 channel of minting:
Prime Mining Channel
This mining channel looks for a special prime cluster of a set length. This type of calculation is resistant to ASIC mining, allowing for greater decentralization. This is most often performed using the CPU.
Hashing Channel
This channel utilizes the more traditional method of hashing. This process adds a random nonce, hashes the data, and compares the resultant hash against a predetermined format set by the difficulty. This is most often performed using a GPU.
Proof of Stake (nPoS)
Staking is a form of mining NXS. With this process, you can receive NXS rewards from the network for continuously operating your node (wallet). It is recommended that you only stake with a minimum balance of 1000 NXS. It’s not impossible to stake with less, but it becomes harder to maintain trust. Losing trust resets the interest rate back to 0.5% per annum.
2. How do I mine Nexus?
As outlined above, there are two types of mining and 1 proof of stake. Each type of mining uses a different component of your computer to find blocks, the CPU or the GPU. Nexus supports CPU and GPU mining on Windows only. There are also third-party macOS builds available.
Please follow the instructions below for the relevant type of miner.
Prime Mining:
Almost every CPU is capable of mining blocks on this channel. The most effective method of mining is to join a mining pool and receive a share of the rewards based on the contribution you make. To create your own mining facility, you need the CPU mining software, and a NXS address. This address cannot be on an exchange. You create an address when you install your Nexus wallet. You can find the related steps under How Do I Install the Nexus Wallet?
Please download the relevant miner from http://nexusearth.com/mining.html. Please note that there are two different miner builds available: the prime solo miner and the prime pool miner. This guide will walk you through installing the pool miner only.
Step 1 - Extract the archive file to a folder.
Step 2 - Open the miner.conf file. You can use the default host and port, but these may be changed to a pool of your choice. You will need to change the value of nxs_address to the address found in your wallet. Sieve_threads is the number of CPU threads you want to use to find primes. Ptest_threads is the number of CPU threads you want to test the primes found by the sieve. As a general rule, the number of threads used for the sieve should be 75% of the threads used for testing.
It is also recommended to add the following line to the options found in the .conf file:
"experimental" : "true"
This option enables the miner to use an improved sieve algorithm which will enable your miner to find primes at a faster rate.
Step 3 - Run the nexus_cpuminer.exe file. For a description of the information shown in this application, please read this guide.
The GPU is a dedicated processing unit housed on-board your graphics card. The GPU is able to perform certain tasks extremely well, unlike your CPU, which is designed for parallel processing. Nexus supports both AMD and Nvidia GPU mining, and works best on the newer models. Officially, Nexus does not support GPU pool mining, but there are 3rd party miners with this capability.
The latest software for the Nvidia miner can be found here. The latest software for the AMD miner can be found here. The AMD miner is a third party miner. Information and advice about using the AMD miner can be found on our Slack channel. This guide will walk you through the Nvidia miner.
Step 1 - Close your wallet. Navigate to %appdata%\Nexus (~/Library/Application Support/Nexus on macOS) and open the nexus.conf file. Depending on your wallet, you may or may not have this file. If not, please create a new txt file and save it as nexus.conf
You will need to add the following lines before restarting your wallet:
Step 2 - Extract the files into a new folder.
Step 3 - Run the nexus.bat file. This will run the miner and deposit any rewards for mining a block into the account on your wallet.
For more information on either Prime Mining or Hashing, please join our Slack and visit the #mining channel. Additional information can be found here.
3. How do I stake Nexus?
Once you have your wallet installed, fully synchronized and encrypted, you can begin staking by:
After you begin staking, you will receive a Genesis transaction as your first staking reward. This establishes a Trust key in your wallet and stakes your wallet balance on that key. From that point, you will periodically receive additional Trust transactions as further staking rewards for as long as your Trust key remains active.
IMPORTANT - After you receive a Genesis transaction, backup your wallet.dat file immediately. You can select the Backup Wallet option from the File menu, or manually copy the file directly. If you do not do this, then your Nexus balance will be staked on the Trust key that you do not have backed up, and you risk loss if you were to suffer a hard drive failure or other similar problem. In the future, signature chains will make this precaution unnecessary.
4. I am staking with my Nexus balance. What are interest rate, trust weight, block weight, and stake weight?
These items affect the size and frequency of staking rewards after you receive your initial Genesis transaction. When staking is active, the wallet displays a clock icon in the bottom right corner. If you hover your mouse pointer over the icon, a tooltip-style display will open up, showing their current values.
Please remember to backup your wallet.dat file (see question 3 above) after you receive a Genesis transaction.
Interest Rate - The minting rate at which you will receive staking rewards, displayed as an annual percentage of your NXS balance. It starts at 0.5%, increasing to 3% after 12 months. The rate increase is not linear but slows over time. It takes several weeks to reach 1% and around 3 months to reach 2%.
With this rate, you can calculate the average amount of NXS you can expect to receive each day for staking.
Trust Weight - An indication of how much the network trusts your node. It starts at 5% and increases much more quickly than the minting (interest) rate, reaching 100% after one month. Your level of trust increases your stake weight (below), thus increasing your chances of receiving staking transactions. It becomes easier to maintain trust as this value increases.
Block Weight - Upon receipt of a Genesis transaction, this value will begin increasing slowly, reaching 100% after 24 hours. Every time you receive a staking transaction, the block weight resets. If your block weight reaches 100%, then your Trust key expires and everything resets (0.5% interest rate, 5% trust weight, waiting for a new Genesis transaction).
This 24-hour requirement will be replaced by a gradual decay in the Tritium release. As long as you receive a transaction before it decays completely, you will hold onto your key. This change addresses the potential of losing your trust key after months of staking simply because of one unlucky day receiving trust transactions.
Stake Weight - The higher your stake weight, the greater your chance of receiving a transaction. The exact value is a derived by a formula using your trust weight and block weight, which roughly equals the average of the two. Thus, each time you receive a transaction, your stake weight will reset to approximately half of your current level of trust.
submitted by scottsimon36 to nexusearth [link] [comments]

The Hempcoin Community Guide Q1 201

Table of contents:

  1. Preface
  2. Tools:
    • Masternode Calculator
    • Fork Preparedness guide
    • Mining Guide
  3. Current projects
  4. Social Platform Links
  5. F.A.Q's


In the past month, we, the team at The HempCoin have been making some huge changes, both internally and business development wise. We have added 3 new roles to the team: Community Outreach Manager, Business Development Manager, and Brand Ambassadors. Thanks to this, we have had many new developments which have shifted our timeframe a little as you may have seen. That being said, we are committed to ensuring our community is kept as up-to-date as possible and provided with as many support materials as we can create. We've spent the better half of two weeks writing up this guide and the tools included in it, in hopes that it will help answer many of the common questions we have been seeing and even some of the less common ones.


Masternode Calculator:
Ever since we have announced that we will be forking into a masternode coin, we have been asked for the details and specifics of the reward payout for a node. Seeing this, we have created a Spreadsheet that is editable by the community. It will calculate the rewards for any number of nodes, and also tell you the expected payout in USD based on a price the user can input. You can find the link to the sheet here.
Fork Preparedness Guide:
This guide will ensure you will be completely prepared for the upcoming fork. We have been seeing many questions about the fork which is understandable, and hopefully, this will alleviate many of those by ensuring all of our investors know how to make sure they are prepared, no matter their platform.
Windows: Currently there are two options for coin storage on windows. Bittrex, the exchange that THC is currently traded on, or our official wallet. the safest and most secure option would be to store your coins in the private wallet, however, Bittrex has also confirmed with us that they will be supporting our fork. If you are planning on storing your coins there, all you need to do is purchase the THC and leave it be, once we fork, you will get the new coin from bittrex automatically and that is all. If you intend on using our private wallet, you can download the most up-to-date version from our GitHub here. Once you install it, you will need to let it run to synchronize, this has been known to take a very long time (due to having to sync all blocks since 2014). Once we fork, we will ensure this is alleviated, however, for now, you can follow the tutorial that was written here which will help you go from needing about 2 weeks to sync to about 3 hours at max. Either of these coin storage options will ensure you are completely supported during our fork.
Mac: At the moment, our current wallet only supports the Windows platform. Once we complete our fork there will be a wallet available for all platforms including mac an Linux. So, if you do not have access to a Windows PC your best option for securely storing your coins during our fork is to store them on Bittrex. They have confirmed with the team that they will be supporting the fork so your coins will be safe with them.
Linux: As you may have read above, our wallet currently only officially supports the Windows platform at the moment, however, there have been users who have reported that they have been successful in installing the wallet on Linux. However, at the time, we do not officially support the platform. Our advice would be the same as provided to the Mac users, storing your coins on bittrex would be the best option until our Linux wallet is available.
Android: Currently, the only wallet we know of that will support THC on android is Coinomi. The community has been asking on their support forum if they will be supporting the fork and the reply that was received was somewhat unsure. They stated that no coins will be lost, but never confirmed if they would be adapting to the new algo and giving out any new coins. As the team, we have not heard whether or not they will be supporting the fork so the best plan for android users would be to either transfer your coins to a windows wallet, or to bittrex to ensure you are supported. We are not saying coinomi will not support the fork, however, it is an unknown, and we would prefer to ensure that there is 100% support.
Mining Guide:
Lately, we have seen quite a few inquiries about the possibility of mining THC. Currently, there is only one pool that we are aware of which is hosted on the mining-dutch.nl. The tutorial written below will cover how to get started mining with an NVIDIA GPU using the mining-dutch servers, on a Windows-based PC. AMD GPU's have a very similar process, the main difference will be that you need to swap out the program CCMiner for a program which supports the AMD architecture.
To start mining you'll need a few things:
  • A decent GPU (as many as possible really, these are the brains of the operation).
  • A fairly well-ventilated PC case(if you're just mining with your gaming PC)
  • Instead of a PC case a lot of big-time miners just use shelves and build the multi-GPU rigs on those.
  • A mining program (For this tutorial we will be using CCMiner but there are plenty of great alternatives out there too)
  • A pool to mine from (Think of this as a meeting place for all the GPUs to team up and mine faster)
Now that we know what we need to mine, let's get started on setting it up:
  1. Download the correct version of CCMiner: CCminer for 32bit systems or CCminer for 64bit systems (both of these files are just pulled straight from the github).
  2. You may need to install a program to open 7z files such as WinRar.
  3. Extract these files to somewhere like C:\Program Files, or at least somewhere you won't forget about them.
  4. You should see an api folder, a program called ccminer.exe (sometimes ccminer-x64.exe) and a few other small files. What you want to look for is ccminer.conf, this is your config file. You use this to tell your program what pool to mine from.
  5. Open up ccminer.conf with notepad or notepad++ if you have it installed (or really any other coding software) and now we can get to the file editing.
  6. When you open ccminer.conf you should see something that looks like this. (excuse the pastebin link, reddit doesnt seem to like code in lists.)
  7. Next, go to the mining-dutch link and setup an account. (Direct link to signup page)\
  8. (These next links will likely only work once you register and sign in)
  9. Proceed to the workers page (Normally found under My Account>My Workers)
  10. A worker is essentially telling the pool what machine is working for you. Create a new worker by entering in "Workername" "Password" and check the monitor box. Now just hit create.
  11. Now, go back to the ccminer.conf file that we opened earlier. If you follow this link you should see something that looks very much like your file, however, it also has labels, #1, #2, #3.
  12. On your file, fill in #1 with "stratum+tcp://mining-dutch.nl:3435" (this can be found on the mining dutch website, its just hidden. In the top right, click the cloud with the blue icon (getting started) then scroll down to the Vardiff address for Hempcoin)
  13. #2, enter your "loginname.workername" Login name being your username to login to mining-dutch, then workername being what you just named the worker we created.
  14. #3 can be filled with anything, they don't use passwords.
  15. This should really be all you need. Now save the ccminer.conf and then just run ccminer.exe
If all of this was done correctly you should see a command-prompt window pop up and your machine start to mine. It takes some time to get going so that is not unheard of, and also, if you look at the dashboard you may not see your worker show up for a while. This is normal, it uses averages over time to tell you what performance it is getting so it won't have a proper value for a few minutes.

Current Projects

We are always working on advancing all of our roadmap goals, however, lately, we have been focusing on a few key projects which are listed below (in no specific order).
  • Putting the finishing touches on the new wallet.
  • Ensuring bittrex is ready for the fork.
  • HempPay.
  • Merchant Services
  • Our mobile app
  • Graphics that will better represent the new THC.
  • A brand new website (launching soon!).
  • Connecting with many different owners/affiliates/partners to businesses which would like to use THC locally.
  • Implementing the ambassador program
  • Internal organization to ensure everyone is on the same page at all times.

Social Platform Links

One of the larger changes we have made is to bring a community outreach manager onboard to work on communication. We may have had missteps in the past, however that is in the past, we have changed and want to ensure we show you that change! Keeping in line with that, we have heard your cries for a more community-oriented social stance, so, we have created an official discord chatroom where anyone can come and chat with some of the devs, or the rest of the community to stay in the loop. We have also created a telegram more recently, which as of the date of typing this, has over 1000 members already, and it was only released less than a week ago. We do ask that everyone who joins reads over the rules that are posted in both locations and abides by them so we can have a clean and organized community. We are always looking to expand and if you have any more suggestions feel free to let us know!


Q: I transferred X amount of THC to my wallet, but it's missing? A: The first step to ensuring you never lose any THC is to confirm the wallet address. Always, always, always double and triple-check that the address you input is the same as your address. If there are ANY typos at all, you will not receive your coins. If you have checked and are sure that the address is correct, check your wallet. If you have just installed it, chances are you are still syncing with the blockchain; you will need to wait until you are caught up to see the THC. It's best practice to sync your wallet before you make any transfers. To check the status of your synchronization, check the debug menu in the wallet, it will show you the exact date you are synced to. Lastly, if you are for sure synced, and you have used the correct address, check the transaction ID on the block explorer. This will show what happened with the transaction and allow you to follow where it went. It could also still just be in progress, sometimes it can take up to an hour if there are service delays with the exchange or even just your internet connection.
Q: Why have there been so many delays with THC? You have been around forever! A: Although THC was one of the first 30 cryptocurrencies mined in 2014, the unfortunate truth is that before April 2017, there was no active full-time team. Since then, the original THC FoundeDeveloper and current CEO Tim has worked hard to add incredible new developers, a business outreach team, an entire marketing team, and the brand ambassadorship program. It has taken us a little time to organize, but we are finally in sync as a team and prepared to unleash this business on the world.
Q: When is the fork? A: As many of you have noticed, our whitepaper says fork will occur by Q2, while we previously announced Feb. 23rd. We did this not to provide our community with doubts, but to allow ourselves an added bit of time for our dev team which, like the rest of our team, has added new members in recent months. Due to this, we are far further along with our HempPay platform than we thought possible; as such we will be hiring 3rd party code auditor to audit our code to ensure we run as smoothly as possible. We would much rather delay a fork than risk any of our investor's privacy or security and fork too early. We also want to reiterate that we have a direct line with Bittrex and they will 100% support our fork. We do appreciate everyone’s patience with this transition into the future of THC; we’re working hard to ensure that we fork as early as possible.
Q: Will Bittrex be supporting the fork? A: We have seen this question come up many times now and the answer is, and will always be, yes. Bittrex is well aware of our plans and they know exactly where we stand regarding the fork date. Bittrex has also asked requested our community stop creating support tickets just to confirm the fork. They have been overwhelmed this week with the same question over and over. The final answer here is yes, Bittrex will be supporting the fork and we are in constant contact with them to ensure everything is going as planned.
Q: Will purchases with a credit card to HempPay count as cash advances? A: We are still in the middle stages of building HempPay and finalizing the format for operation and contractual agreements. We intend to partner with exchanges and use their API to make the purchases, so buying THC through our app will have the same effect as using your card to purchase straight from an exchange. Please note that HempPay is still in development so exact details may be subject to change.
Q: What is the cost for a masternode? Some say 10,000 others say 20,000 THC is required. A: To run a masternode, 20,000 THC will be required. We do acknowledge that during our transition, we had originally stated 20,000 and then our team announced 10,000 THC will be required. We have since readjusted our plan, realizing that the low requirement would sink MN profits and lower incentive. Instead, we returned the requirement to 20,000 THC and increased the node reward by 66%. For more information please check the masternode calculator in the Tools section.
Q: I heard Bittrex may delist THC. What?? A: Short answer: No and not even close. Long answer: This rumour was started over a year ago, it was based on a Bittrex Support post from January 27th, 2017. The only post we appear in is the one mentioned above. You will also see that we only appear due to being listed as a potential for removal, due to a lack of volume as most altcoins saw at that time. You will note the size of the list of altcoins here. We are now in direct communication with Bittrex daily and we unequivocally state that there is no need to worry about us being removed at all.
submitted by zacharyd3 to thehempcoin [link] [comments]

0xBitcoin (0xBTC) nVidia CUDA Miner, Pre-Built for Windows and Instructions. Newbie-friendly!

** PLEASE READ THE README! See the end of this post for more troubleshooting tips! Thanks! **
NOTE: I've retracted build TOFU-RC1.1 because of an issue communicating shares to the pool. I'll put another build together for Windows X64, and any info you will need to run it, once we figure out what the issue is. Thanks for your patience! RC1 does not show a hashrate report, but you can verify your approx. hashrate on the TMP pool's stats page.
** This build brings CUDA mining functionality from Linux to Windows X64 users. I tried to make it as easy to set up as possible. This is still software in-the-works, so please report any problems you might have here or at the Discord so we can figure them out! Thanks! **
Here's my attempt at making the CUDA miner work on Windows, and making it as painless as I can! Hopefully this is fairly "plug and play". :) I also added some functionality. I hope you guys like it! The enclosed README.txt should explain how to run and use it and solutions to some common problems.
Build Mag517-RC1 for Windows X64: https://drive.google.com/open?id=1QWF_S7mfLGDk2YARC1ZZBYkmpqILLr0h
I am going to commit my changes to the GitHub, once I set it up.
Hurrah to the whole OPEN SOURCE 0xBitcoin miner team on the Discord! Including Infernal Toast, Mikers, @0x1d00ffff, developers of code this project is based on, coder of the original CPU miner and 1000x "Kaio-Ken" version... plus everyone else who knows who they are!
Good Luck! May I suggest we join forces and point our miners at the TMP pool for the time being: http://tokenminingpool.com:8586 so that we can get some blocks and give PizzaPool some competition, with lower-fee pools and open-source, community supported miners. Let's take back the game! ;)
Donations [ETH/0xBTC] welcome! Help my broke ass buy groceries. 0xa8b8ea4C083890833f24817b4657888431486444


Is your machine's GUI too slow when mining? Try reducing intensity with the Block and Thread settings (Read on), turn off Hardware Acceleration in Windows and applications like FireFox, Chrome and Discord to make them draw with the CPU more, not the busy GPU.
If you want it buttery-smooth, boot up with your monitor connected to a separate graphics card and mine on the non-display adapter. If your CPU has on-chip graphics, you can probably hook up to your motherboard's video output (not your graphics card's). Make sure the processor or onboard graphics are enabled and set as default in your BIOS/UEFI setup.
This is a command-line miner, so you must run it in a command prompt / powershell to see any output if it closes prematurely. Most often, the error you're looking at is the next one:


Make sure you have CUDA v9.1 or latest installed. Install the patches that are on the same download page after you install the main package. Make sure the paths have been added to your Environment Variables in the System Control Panel, Advanced Settings. Reboot or at least log out and back in to apply the new paths before running the miner.


Remove an SLI or Crossfire bridge, if present. Disable SLI/Crossfire. Rename the EXE file to something else. Run both instances and use the nVidia Control Panel (right-click Desktop, nVidia option) to configure which card should run which process. This neat trick was discovered by @DigitalApathy on the Discord server!


Investigate the reported error, if any. This is most often caused by too high Block / Thread settings. It can also mean the GPU is busy, as in the miner did not gracefully close and release the device. Reboot or otherwise reset the card via software.
POOL NOTE: I strongly recommend the use of TokenMiningPool and 0xPool as of 03.10.2018. This is so that we can build up a large enough hashpower to compete with the Pizza Pool (closed-source mining pool with DevFees.) Right now, PizzaPool is getting most of the blocks and the community pools aren't getting a fair shake. Let's join forces on TMP and 0xPool!
Enjoy! - Lt. Tofu
submitted by LieutenantTofu to 0xbitcoin [link] [comments]

Changelog 4.2.6 (18 Dec 2017)

Version 4.2.6
Version 4.2.5
Version 4.2.4
Version 4.2.3
Version 4.2.2
Version 4.2.1
Version 4.2
Version 4.1.2
Version 4.1.1
Version 4.1
IMPORTANT: CcMiner 2.2.2 requires nVidia Drivers 384.xx or later for Cuda9 support.
Version 4.0.7
Version 4.0.6
Version 4.0.5
Version 4.0.4
Version 4.0.3
Version 4.0.2
Version 4.0.1
Version 4.0
submitted by exigesDB to AwesomeMiner [link] [comments]

EXECUTE A PROJECT IN CMD USING DTEXECUI Bitcoin Money: How to Mine Bitcoins Part 2 - YouTube How To Mine CryptoCurrency On PC And Earn Money  Bitcoin  Ethereum How to mine ethereum on a mining pool bmm vpn pro serial number 30/11/2018 bitcoin hack

All command-line options (except for -conf) may be specified in a configuration file, and all configuration file options may also be specified on the command line. Command-line options override values set in the configuration file. The configuration file is a list of setting=value pairs, one per line, with optional comments starting with the '#' character. The configuration file is not ... This client includes a command-line miner which supports CPU mining (and GPU, should you have one available). But unless you're mining in a pool, you're not going to get any benefit from CPU mining. And even with a pool, you'll get very little. Bitcoin; Apps; Guides; Opinion; About; Full list of Claymore’s GPU miner parameters and command line options. April 14, 2019 by Stephen Hall. If you’ve been mining with Claymore’s for a while now, you might have realized that the program is far more powerful than you thought. While it’s easy to get it set up and running initially as we detailed in our full Claymore’s guide, it also ... minerd.exe: command line parameters. minerd.exe: command line parameters . Bitcoin Garden, March 6, 2014 0. To get the full list of parameters just type MINERD -h at the command prompt. The output will look something like below: Usage: minerd [OPTIONS] Options: -a, --algo=ALGO specify the algorithm to use scrypt scrypt(1024, 1, 1) (default) sha256d SHA-256d -o, --url=URL URL of mining server ... In this post I will show you the very easy steps to mine with the latest Minergate CLI miner. CLI stands for Command Line Interface, which in this case means there is no GUI where you can click and edit things. All is done on from the Windows Command line (CMD). Step one: Download the latest CLI miner from minergate.com. There is at this moment a Beta version which claims to be 20% faster so ...

[index] [38345] [8090] [12597] [37503] [28619] [35500] [47948] [20884] [11284] [24467]


open command prompt run cmd.exe type "cd /" no quotation marks, just cd / and press enter this will take you to the C drive now type cd "Program Files" (make sure you type quotation marks here ... How to use the daemon, wallet, and miner on the command line in your CryptoNote-based cryptocurrency - Duration: 8:59. Blockchain Programming 1,577 views This video is unavailable. Watch Queue Queue Minergate Website Link : https://za.gl/WNam Connect with us on these : Follow Me On Youtube : https://www.youtube.com/c/Majidzhacker Follow Me On Instagram: ... Fast Bitcoin miner. How to download and start mining. ... Charisma on Command Recommended for you. 13:30 . 100% working Btconline hack that will not affect your account! - Duration: 5:23. Uroid ...